Cubot X20 Pro

Cubot X20 Pro

Markus2015 on Friday, 15.November 2019 2:40 pm

I had received the X20 Pro a few days ago.It is really incredible for the price.I also had the model iPhone 11 Max in my hand at the same time and saw no significant difference from the processing.The Cubot even has significantly thinner edges.The FHD+ Display has au optronics (AUO) LT.Factory Mode provided and is a dream: very good sharpness, perspective, white balance, colors.It will not be outclassed if you lie with the model next to it.It is almost silly, which is against.B.is installed in the Huawei p Smart.Antutu showed me performance at just under 180.000 on.The reception is trains is extremely stable, in contrast to many other signal wobble devices.Here you can trust Cubot fully.Unfortunately, 5GHz WLAN is missing in version 11.10.2019.I've never seen that with a P60.Probably Rome error.I cannot confirm the lack of quick charge.With my thick Umidigi standard power supply, it went rapidly to over 10 % higher in a short time.This definitely has quick charge with a suitable power supply.The good thing about the camera is M.E.The bokeh and portrait fashion, whereby the main camera only has a solid bokeh without a blurred ferry, only has the selfie camera.This is not so bad at all in daylight, there are many who make more imaging errors in the bokeh.I did not have complete color falsifications, as other reviews reported.The only bad thing about the device is the fact that Cubot is the Sony IMX486 sensor firmware without any adjustment with the basic camera conductor of the P60 Pro, which all manufacturers have received from the factory (Umidigi, Ulefone U.a) have put in.You can do that with the P23 but never with the P60.The standard denoise, which is completely unadjusted in terms of the IMX486 firmware, transforms trees into some concrete and then tries to pull out structures by over sharpening and Edgeing.It looks really disgusting.At best, you can only do the simple in with the Samsung GM1 due to its high signal strength, never with the Sony IMX486.Above all, the exposure control at Low Light is not at all right.Everything is too dark and too intoxicating.I was able to confirm the sensors communicated by Cubot in the factorymode.They should have really invested € 2o more for a Samsung GM1.

Cubot X20 Pro

0 cancel answers

I had received the X20 Pro a few days ago.It is really incredible for the price.I also had the model iPhone 11 Max in my hand at the same time and saw no significant difference from the processing.The Cubot even has significantly thinner edges.The FHD+ Display has au optronics (AUO) LT.Factory Mode provided and is a dream: very good sharpness, perspective, white balance, colors.It will not be outclassed if you lie with the model next to it.It is almost silly, which is against.B.is installed in the Huawei p Smart.Antutu showed me performance at just under 180.000 on.The reception is trains is extremely stable, in contrast to many other signal wobble devices.Here you can trust Cubot fully.Unfortunately, 5GHz WLAN is missing in version 11.10.2019.I've never seen that with a P60.Probably Rome error.I cannot confirm the lack of quick charge.With my thick Umidigi standard power supply, it went rapidly to over 10 % higher in a short time.[b] This definitely has quick charge with a suitable power supply.[/b]The good thing about the camera is M.E.The bokeh and portrait fashion, whereby the main camera only has a solid bokeh without a blurred ferry, only has the selfie camera.This is not so bad at all in daylight, there are many who make more imaging errors in the bokeh.I did not have complete color falsifications, as other reviews reported.[b] Since the only evil [/b] The fact that Cubot is the fact that Cubot is the Sony Imx486 sensor firmware without any adjustment with the basic camera conductor of the P60 Pro that have received all manufacturers from the factory (Umidigi, Ulefone U.a) have put in.You can do that with the P23 but never with the P60.The standard denoise, which is completely unadjusted in terms of the IMX486 firmware, transforms trees into some concrete and then tries to pull out structures by over sharpening and Edgeing.It looks really disgusting.At best, you can only do the simple in with the Samsung GM1 due to its high signal strength, never with the Sony IMX486.Above all, the exposure control at Low Light is not at all right.Everything is too dark and too intoxicating.I was able to confirm the sensors communicated by Cubot in the factorymode.They should have really invested € 2o more for a Samsung GM1.

I had received the X20 Pro a few days ago.It is really incredible for the price.I also had the model iPhone 11 Max in my hand at the same time and saw no significant difference from the processing.The Cubot even has significantly thinner edges.The FHD+ Display has au optronics (AUO) LT.Factory Mode provided and is a dream: very good sharpness, perspective, white balance, colors.It will not be outclassed if you lie with the model next to it.It is almost silly, which is against.B.is installed in the Huawei p Smart.Antutu showed me performance at just under 180.000 on.The reception is trains is extremely stable, in contrast to many other signal wobble devices.Here you can trust Cubot fully.Unfortunately, 5GHz WLAN is missing in version 11.10.2019.I've never seen that with a P60.Probably Rome error.I cannot confirm the lack of quick charge.With my thick Umidigi standard power supply, it went rapidly to over 10 % higher in a short time.[b] This definitely has quick charge with a suitable power supply.[/b]The good thing about the camera is M.E.The bokeh and portrait fashion, whereby the main camera only has a solid bokeh without a blurred ferry, only has the selfie camera.This is not so bad at all in daylight, there are many who make more imaging errors in the bokeh.I did not have complete color falsifications, as other reviews reported. [b] Since the only evil [/b] The fact that Cubot is the fact that Cubot is the Sony Imx486 sensor firmware without any adjustment with the basic camera conductor of the P60 Pro that have received all manufacturers from the factory (Umidigi, Ulefone U.a) have put in.You can do that with the P23 but never with the P60.The standard denoise, which is completely unadjusted in terms of the IMX486 firmware, transforms trees into some concrete and then tries to pull out structures by over sharpening and Edgeing.It looks really disgusting.At best, you can only do the simple in with the Samsung GM1 due to its high signal strength, never with the Sony IMX486.Above all, the exposure control at Low Light is not at all right.Everything is too dark and too intoxicating.I was able to confirm the sensors communicated by Cubot in the factorymode.They should have really invested € 2o more for a Samsung GM1.

Cancel update comment